Solar outdoor lights
to brighten your home
【Aluminum Alloy Housing Solar Lights】Different from other solar lamps with plastic housing. Lightweight but strong. Sandblasted and anodized metal housing,anti-oxidation and corrosion resistance. It can be used for many years even in extreme weather or harsh outdoor environments and maintain its performance. The lampshade is made of engineering plastic PC material, which is heat-resistant, anti-ultraviolet, and anti-yellowing.
【High Efficient Solar Panel】PET solar panel with a larger lighting area, it can absorb sunlight faster, so that it can be recharged faster. Charging for 8 hours, can be illuminated for more than 12 hours.
【High-END LED For Bright Outdoor Lighting】24/48/60 LED 2835 high-end LED beads, 6000k white color temperature appears brighter, and it can reach 900 lumens in bright mode. The lampshade surface is curved by a large angle. The structure is designed to diffuse the light outwards, which has the characteristics of large-area illumination.
【Microwave Radar Induction & Dawn To Dusk Lighting】Radar motion sensor is a detector that combines microwave receiving and transmitting equipment. The working principle is based on the Doppler effect. The microwave wavelength is very short, between 1mm and 1000mm, so it is easily reflected by objects.The sensing angle is greater than 180°, and the farthest sensing distance can reach 32 feet.Ultra-long runtime on always on mode,up to 12H for dusk to dawn lighting.
【Four Working Modes & Waterproof】Four working modes meet all your requirements for lighting.Mode:Faint light to strong light ;No light to strong light;Always lighting;Emergency lighting.You can set the mode arbitrarily.Waterproof,suitable for any outdoor scene: Garage, aisle, porch, patio, garden, deck, camping, yard, farm, fence, wall, etc.
Product Information:
24LED:
· Solar panel:5V,1.5W
· Lithium battery:3.2V,1500mAh
· Maximum lumen:450LM
· Charging time:6hours
· Working time:depends on which mode on,more than 500times
sensor after fully charged,keep 10 hours at mode 3(about half of strong
lighting)
· Sensing distance:5-10M/16.4-32.8ft
· Sensing angle:more than 180°
· Irradiation area more than 30㎡
48LED:
· Solar panel:5V,3.2W
· Lithium battery:3.2V,3000mAh
· Maximum lumen:900LM
· Charging time:6hours
· Working time:depends on which mode on,more than 500
times sensor after fully charged,keep 10 hours at mode 3(about half of
strong lighting)
· Sensing distance:5-10M/16.4-32.8ft
· Sensing angle:more than 180°
· Irradiation area more than 60㎡
60LED:
· Solar panel:5V,4.2W
· Lithium battery:3.2V,6000mAh
· Maximum lumen:1100LM
· Charging time:6hours
· Working time:depends on which mode on,more than 500times
sensor after fully charged,keep 10 hours at mode 3(about half of strong
lighting)
· Sensing distance:5-10M/16.4-32.8ft
· Sensing angle:more than 180°
· Irradiation area more than 80㎡
How to use:
Power on:press and hold the switch for 5-10 seconds to start the first mode.
4 Modes Features: each press of a button will replace a light mode,switch circularly.
The modes are as follows:
1 - Dim, full bright when motion detected
2 - Off, full bright when motion detected
3 - Medium all night, no motion detection
4 - Manual - full bright for 30 minutes
How to start the solar light and switch between the four modes?
1.Long press 5s to start, then turn on the low light to strong light sensor mode:
-
The lamp would be on with strong light when people go through the light induction area, the lamp would be slight after the people have left for 15s.
2.Second press for 1s to start the strong light sensor Mode:
-
The lamp would be on with strong light when people go through the light induction area, and the lamp would be off after the people have left for 15s.
3.Third press for 1s to start the constant light mode:
-
The light is always on after dark and has no sensing function.
4:Fourth press for 1s to start the emergency light mode:
-
Emergency lighting for 30 minutes, continue lighting for 30 minutes if the solar panel senses light.
